Use Commomy 3D Gray Brick Tile Peel and Stick to Create an Accent Wall that Won’t Be Outmoded!
has a 3D real brick pattern with high-quality peel and stick backing, it can simply stick to any smooth, flat surface to install. It’s the perfect choice when you want to make your wall classic and elegant!
Feature
-
Stunning 3D Embossed Texture: Realistic 3D surfaces perfectly simulate various real decorative tiles and are lightweight and flexible.
-
Premium Quality: Made of eco-friendly materials, no dioxins. Resistant to water and heat, no color fading.
-
Stronger Upgraded Adhesive: Stick firmly to the smooth & clean surface and available on lightly textured walls.
-
Fast and Easy Installation: Just peel and stick! No grout, no cement, and no mess! Easy cut with the utility knife or the scissors. Perfect for a wall decor DIY project.
-
Widely Applicable: Living Room, TV Wall, Bedroom, Kitchen, Bathroom, Laundry Room, Hallway, Office, RV/Camper, et.
Product Detail
-
Primary Material:PVC
-
Surface Type: Matte
-
Water Resistant: Yes
-
Heat Resistant: Yes
*Our product pictures are actual pictures. Photography on this page is for representation only. Please note that the tile photographed may appear to have a slightly different hue on a screen due to screen resolution, color settings, and a variety of other factors.
*Purchase Enough Tiles at A Time. Please consider 10% cutting loss and purchase enough tiles at a time to make sure they come from the same batch to avoid slight color difference.
What‘s Include
- 1/10 Sheets Per Pack
- 9.7 Square Feet/ 0.9 ㎡ for 10 sheets
- 11.8 Inches x 11.8 Inches x 0.1 Inches/ 30 cm x 30 cm x 0.3 cm Per Sheet
Easy Installation
-
Step 1– Thoroughly clean and dry your wall.
*Tips: If your walls are freshly painted, wait up to three weeks before applying tiles.
-
Step 2– Plan where you want to install and cut the size accordingly to better fit the wall.
-
Step 3– Peel off the backing and stick side by side for a seamless appearance.
-
Step 4– Firmly once you are certain of placement with a plastic smoother to ensure best possible adhesion, especially the grout lines or the most concave area of the tile surface.
IMPORTANT TIPS
- Typically the backing adhesive will complete the bond to the wall within 48 hours. After 24 hours of installation, Press the grout lines firmly again to ensure more perfect adhesion.
- Our adhesive tiles can be placed on all clean and sleek surfaces. They are not suitable for outdoor settings or on the floor.
- If you want to remove the tile, use a heat gun or a blow dryer to warm up the glue and pull softly starting with the corners, that won’t damage the wall.
- In long-lasting usage, we recommend keeping 12 inches or 30 cm away from the center of the stove and fireplace.
- We do not recommend installing our 3D Wall Decor Tiles in your shower since they will be in direct contact with water.
looking very good
not exactly as pictured, but ok nonetheless
ok